Petroleum Derivatives
Beyond the primary fuels, a refinery produces a wide family of streams that feed lubricant blending, petrochemicals, agriculture and manufacturing. IFENERGY supplies these derivatives to industrial end-users and traders, with specification sheets matched to the buyer’s process and quality released against batch analysis at the loading terminal.
01Product families we supply
Base oils and lubricants. Group I solvent neutrals SN 150, SN 500 and SN 650, bright stock BS 150, and Group II/III hydrocracked bases for modern engine and industrial oil formulations.
Fuel oil and residues. Mazut M-100 to GOST 10585, IFO 180/380 and low-sulphur VLSFO 0.5 % for marine and industrial boilers and power stations.
Light ends. Light and heavy naphtha, gas condensate, LPG propane/butane mixes and MTBE for gasoline blending and petrochemical crackers.
Waxes, sulphur and specialities. Fully and semi-refined paraffin wax, slack wax, granular and lump sulphur, urea 46 % prilled/granular, petroleum coke, and hydrocarbon solvents 402/410/3040 plus BTX aromatics.
02Key Advantages
- One counterparty for a broad basket of refinery streams
- Specification matched to the buyer’s process, not just the market grade
- Batch certificates of analysis from accredited laboratories
- Packing from 25 kg bags to full parcel tankers
- Consolidated shipments to reduce freight cost per tonne
03Applications
- Lubricant blending plants and grease manufacture
- Marine bunkering and industrial boiler fuel
- Petrochemical crackers and gasoline blending
- Candle, cosmetics, packaging and rubber industries
- Fertiliser production and agricultural supply chains
04Technical Features
- Base oil: SN 150, SN 500, SN 650, BS 150, Group II/III
- Fuel oil: Mazut M-100, IFO 180/380, VLSFO 0.5 %
- Light ends: light/heavy naphtha, gas condensate, LPG, MTBE
- Waxes: fully refined, semi-refined and slack wax
- Sulphur granular/lump and urea 46 % prilled or granular
- Solvents 402 / 410 / 3040 and BTX aromatics
- Petroleum coke, calcined and green
05Typical Specification & Analysis
Indicative values — a batch-specific certificate of analysis is issued for every consignment.
| Parameter | Typical Value | Test Method |
|---|---|---|
| Base oil SN 500 — viscosity @ 40 °C | 95 – 110 cSt | ASTM D445 |
| Base oil SN 500 — viscosity index | ≥ 95 | ASTM D2270 |
| Fuel oil M-100 — viscosity @ 50 °C | ≤ 118 cSt | GOST 10585 |
| Fuel oil M-100 — sulphur | ≤ 2.0 wt % | ASTM D4294 |
| Naphtha — density @ 15 °C | 0.68 – 0.74 g/cm³ | ASTM D1298 |
| LPG — propane/butane ratio | 30/70 – 70/30 | ASTM D2163 |
| Paraffin wax — oil content | ≤ 0.5 wt % | ASTM D721 |
| Paraffin wax — melting point | 56 – 62 °C | ASTM D87 |
| Sulphur — purity | ≥ 99.8 wt % | ASTM D4239 |
| Urea — nitrogen content | 46 % min | ISO 5315 |
| Petroleum coke — sulphur | 0.5 – 4.5 wt % | ASTM D4239 |
06Delivery & Shipping Options
We deliver worldwide under Incoterms 2020 (FOB, CFR, CIF, DAP), with full documentation, third-party inspection and flexible packing.
Bulk & parcel tankers
Base oils and fuel oil in heated parcel tankers; dry bulk vessels for sulphur, urea and coke.
ISO tanks & flexitanks
Heated ISO tanks for base oil and solvents; flexitanks for non-hazardous liquid grades.
Drums, bags & jumbo bags
200 L drums for oils and solvents; 25 kg bags and 1 MT jumbo bags for wax, sulphur and urea.
Hazard compliance
IMDG classification, MSDS and UN-approved packaging for every hazardous derivative.
Related Services
Crude Oil
Light, medium and heavy crude grades — sweet and sour — supplied FOB, CFR and CIF worldwide.
Read moreBitumen
Penetration, viscosity, oxidised, cutback and emulsion grades in drums, jumbo bags and bulk.
Read moreGasoil & Diesel
EN 590 ULSD 10 ppm, 50 ppm, 500 ppm and D2 gasoil, supplied in bulk, ISO tanks and drums.
Read more